Robovanta
2021 Robovanta RV-Tend 12 Machine-Tending Cell
- Year
- 2021
- Model
- RV-Tend 12
- Location
- Vaughan, ON
- Condition
- Excellent
Contact for pricing
This unit is currently reserved. You're welcome to inquire in case it becomes available.
Or call 905-555-0142
Photos
2021 Robovanta RV-Tend 12 Machine-Tending Cell — Photo Gallery
About This Listing
Equipment Details
A 2021 Robovanta RV-Tend 12 robot machine-tending cell, taken in on trade at our Vaughan Tech Centre. This 12 kg payload cell with dual part trays is built to tend a single VMC or lathe through unattended shifts, and it carries genuinely low hours for its age. Our automation technicians ran the arm, gripper and safety fencing through a full test cycle before listing it. Currently reserved for a customer finalizing cell layout; contact us to be notified if it becomes available again.
Traded in by a Vaughan-area machine shop reconfiguring its cell around a larger VMC. Robot arm, gripper and safety fencing tested through a full cycle with no fault codes; part-tray fixturing shows light cosmetic wear only. Currently reserved pending final buyer walkthrough.
Highlights
Key Features
- 12 kg payload 6-axis robot arm
- Dual quick-swap part trays
- Pneumatic parallel gripper with quick-change jaws
- Interlocked perimeter safety fencing
- Pre-built machine-interface templates for major controls
- Vision-ready mounting for future part-detection upgrade
Specifications
2021 Robovanta RV-Tend 12 Machine-Tending Cell Technical Specs
- Payload
- 12 kg (26.5 lb)
- Reach
- 1,300 mm (51.2")
- Part trays
- 2 x interchangeable, quick-swap
- Gripper
- Pneumatic parallel, quick-change jaws
- Safety fencing
- Perimeter fencing with interlocked gate
- Cycle repeatability
- ± 0.02 mm (0.0008")
- Control
- Robovanta RC-Cell teach pendant
- Machine interface
- Fanuc / Siemens / Kaizora control ready
- Recorded cycle count
- 38,000 cycles
| Payload | 12 kg (26.5 lb) |
| Reach | 1,300 mm (51.2") |
| Part trays | 2 x interchangeable, quick-swap |
| Gripper | Pneumatic parallel, quick-change jaws |
| Safety fencing | Perimeter fencing with interlocked gate |
| Cycle repeatability | ± 0.02 mm (0.0008") |
| Control | Robovanta RC-Cell teach pendant |
| Machine interface | Fanuc / Siemens / Kaizora control ready |
| Recorded cycle count | 38,000 cycles |
What's Included
Equipment Package
Included
- Delivery within the GTA, FOB truck
- Installation and machine-interface setup
- Operator and programming training (one day)
- 6-month parts warranty
Not Included
- Custom gripper jaws for specific part families
- Vision system
- Freight outside the GTA
- Taxes
Interested?
This unit is reserved — inquire anyway
This unit may still become available. Submit an inquiry and we'll keep you posted.
New Equipment
Also from Robovanta
Browse our current new Robovanta lineup alongside this used listing.
robotic machine-tending cell
Robovanta RV-Tend 12
The RV-Tend 12 is Robovanta's entry machine-tending cell, built to load and unload parts on an existing CNC mill, lathe or grinder so it keeps running through breaks, shift changes and overnight. A 12 kg payload and 1,650 mm reach cover the majority of small-to-mid part tending jobs, with a dual-shelf storage tower holding up to 48 parts between operator visits. The cell talks to any CNC control through a universal machine-tool interface, so it drops in next to a Kaizora VMC just as readily as an existing machine already on your floor. Tollaston typically pairs the RV-Tend 12 with a customer's first automation project — a single repeat job that currently ties up an operator for a full shift is usually the fastest payback.
robotic machine-tending cell
Robovanta RV-Tend 20
The RV-Tend 20 scales Robovanta's tending platform up to a 20 kg payload and 2,000 mm reach for heavier castings, larger fixtures and multi-part pallets that outgrow the RV-Tend 12. An optional 7th-axis rail lets a single robot service two or three machines in a row instead of sitting dedicated to one, which is where the real automation payback shows up for shops running several similar machines. A modular storage tower holds up to 96 parts, and a tool-changer-equipped gripper handles multiple part geometries in the same cell. Tollaston is the flagship automation recommendation for customers with a Kaizora HMC or KM-2600 mill-turn cell already running production, where the RV-Tend 20's payload and reach match the larger parts those machines handle.