300 W
Highest laser power available
1000 DPI
Engraving resolution
2
Bed sizes to match your shop
Not sure which co2 laser cutting & engraving is right for you?
Our AI can help you compare machines, find parts, and explore your options.
Advantages
Why Choose CO2 Laser Cutting & Engraving?
Cut and engrave in one job
Combined cut-and-engrave job files finish a part in one pass instead of two machines.
Ready on day one
Material preset libraries set speed and power automatically for common stock.
Proven on your material
We run a test job on your own material before the laser leaves Vaughan.
Coast-to-coast service
Laser tubes, optics and technicians across Canada and the US keep you running.
Featured
FC-2030
Wide-bed 300W CO2 laser for production sign, display and packaging cutting and engraving.
Formavex FC-2030
Bed size
2000 x 3000 mm (79" x 118")
Laser power
300 W in-house sealed CO2 laser tube
Max cut thickness, acrylic
25 mm (1")
Max cut thickness, plywood/MDF
18 mm (0.7")
Our Machines
The Complete CO2 Laser Cutting & Engraving Lineup
Each system is engineered for specific applications. Compare specs to find the right fit.
CO2 laser cutting and engraving system
FC-2030
The FC-2030 steps up Formavex's CO2 platform to a 2000 x 3000 mm (79" x 118") bed and a 300W in-house sealed CO2 laser tube, sized for shops cutting and engraving non-metal materials in volume — acrylic, MDF, plywood, foam board, fabric, leather and cardboard. A honeycomb vacuum bed holds thin stock flat across the full width, and the Formavex EdgeLogic control runs cut and engrave passes in one job file so a sign panel comes off the bed cut, engraved and ready to finish. Dual-zone exhaust keeps fume extraction efficient even at full bed length. Tollaston sets up ventilation, runs a test job on your own material, and trains your team on the software.
- Bed size
- 2000 x 3000 mm (79" x 118")
- Laser power
- 300 W in-house sealed CO2 laser tube
- Max cut thickness, acrylic
- 25 mm (1")
- Max cut thickness, plywood/MDF
- 18 mm (0.7")
CO2 laser cutting and engraving system
FC-1390 CO2
The FC-1390 CO2 is Formavex's entry laser for shops cutting and engraving acrylic, wood, fabric, leather and cardboard without the footprint or cost of a production platform. A 1300 x 900 mm (51" x 35") honeycomb bed and 130W in-house sealed CO2 laser tube handle the great majority of sign, award and packaging-prototype work. The Formavex EdgeLogic control's material library sets speed and power automatically for common stock, so new operators are cutting clean parts on day one. Tollaston sets up ventilation, runs a test job on your own material, and trains your team on the software.
- Bed size
- 1300 x 900 mm (51" x 35")
- Laser power
- 130 W in-house sealed CO2 laser tube
- Max cut thickness, acrylic
- 15 mm (0.6")
- Max cut thickness, plywood/MDF
- 10 mm (0.4")
See everything we carry from Formavex.
Side by Side
Compare Systems
See how each platform stacks up across the specs that matter most.
FC-2030Featured
- Best for
- Production sign and packaging volume
- Bed size
- 79" x 118"
- Laser power
- 300 W
- Extraction
- Dual-zone, 1,200 CFM
- Power service
- 208-240V, 30A
FC-1390 CO2
- Best for
- Small shops, awards, prototypes
- Bed size
- 51" x 35"
- Laser power
- 130 W
- Extraction
- Single-zone, 600 CFM
- Power service
- 120V or 208-240V, 20A
| Specification | FC-2030Featured | FC-1390 CO2 |
|---|---|---|
| Best for | Production sign and packaging volume | Small shops, awards, prototypes |
| Bed size | 79" x 118" | 51" x 35" |
| Laser power | 300 W | 130 W |
| Extraction | Dual-zone, 1,200 CFM | Single-zone, 600 CFM |
| Power service | 208-240V, 30A | 120V or 208-240V, 20A |
Applications
Industries We Serve
CO2 Laser Cutting & Engraving systems are trusted across diverse industries and production environments.
FAQ
CO2 Laser Cutting & Engraving Questions
Answers to common questions about our co2 laser cutting & engraving products.
Acrylic, wood, MDF, plywood, fabric, leather, cardboard and similar non-metals. It will engrave coated or anodized metal but does not cut bare metal — that's a fiber or plasma job.
The FC-1390 runs on 120V or 208-240V single-phase 20A; the FC-2030 needs 208-240V single-phase 30A. Both need exhaust ducting to the outside, sized to bed area.
Yes — on-site training covers job setup, material presets and day-to-day operation.
We arrange lease and term financing through our equipment finance partners.
The laser, Formavex EdgeLogic control, exhaust connection kit, rigging and installation, and operator training.
Ready to Discuss Your CO2 Laser Cutting & Engraving Solution?
Our team has 32+ years of experience helping Canadian manufacturers find the right cutting and processing equipment.
32
Years in Business
4,800+
Machines Installed
46
Factory-Trained Technicians
Request a Quote
Tell us about your application and we'll recommend the right machine for your operation.
Financing Available
Flexible payment options on qualifying equipment.
Or email us at [email protected]