Kaizora
2017 Kaizora KT-250 CNC Lathe
- Year
- 2017
- Model
- KT-250
- Location
- Laval, QC
- Condition
- Good
$52,000 CAD
Or call 905-555-0142
Photos
2017 Kaizora KT-250 CNC Lathe — Photo Gallery
About This Listing
Equipment Details
A 2017 Kaizora KT-250 CNC lathe, traded in at our Laval branch by a job shop consolidating turning work onto a larger machine. This is the 10" chuck, 12-station turret configuration most general turning shops run for shaft and flange work in steel, stainless and aluminum. Our Laval service team verified chuck and turret runout and flushed the coolant system before putting it on the used floor. Bilingual sales and service support is available on this unit, as on every machine at our Laval branch.
Traded in by a Quebec job shop consolidating turning capacity onto a larger live-tool lathe. Chuck, tailstock and turret checked for runout at intake, all within factory tolerance at 11,600 recorded spindle hours. Way covers replaced and coolant system flushed before listing.
Highlights
Key Features
- 12-station BOT-type turret
- Programmable tailstock with hydraulic quill
- Chip conveyor with rear discharge
- Rigid tapping on the C-axis
- Coolant-through-turret ready
- Full sliding-door enclosure
Specifications
2017 Kaizora KT-250 CNC Lathe Technical Specs
- Chuck size
- 254 mm (10")
- Swing over bed
- 560 mm (22")
- Max turning diameter
- 320 mm (12.6")
- Max turning length
- 500 mm (19.7")
- Spindle speed
- 4,500 rpm
- Turret
- 12-station BOT-type
- Control
- Kaizora KC-300T (Fanuc-compatible)
- Bar capacity
- 65 mm (2.6") through-hole
- Recorded spindle hours
- 11,600 hrs
| Chuck size | 254 mm (10") |
| Swing over bed | 560 mm (22") |
| Max turning diameter | 320 mm (12.6") |
| Max turning length | 500 mm (19.7") |
| Spindle speed | 4,500 rpm |
| Turret | 12-station BOT-type |
| Control | Kaizora KC-300T (Fanuc-compatible) |
| Bar capacity | 65 mm (2.6") through-hole |
| Recorded spindle hours | 11,600 hrs |
What's Included
Equipment Package
Included
- Delivery within Quebec, FOB truck
- Installation supervision
- Operator training on site (bilingual)
- 30-day parts warranty
Not Included
- Freight outside Quebec
- Tooling and workholding beyond the standard chuck
- Bar feeder
- Taxes
Interested?
Ready to move forward?
Speak with our team about the 2017 Kaizora KT-250 CNC Lathe. We'll provide full details, inspection history, and delivery options.
New Equipment
Also from Kaizora
Browse our current new Kaizora lineup alongside this used listing.
mill-turn multitasking centre
Kaizora KM-2600
The KM-2600 is Kaizora's mill-turn flagship — a true multitasking centre that combines a 30 kW main turning spindle, a synchronized 22 kW sub-spindle, and a 12,000 rpm B-axis milling spindle in one machine. Parts that used to travel between a lathe, a mill and back to a lathe again finish in one setup, with the sub-spindle picking off the part for back-working while the main spindle starts the next piece. Tollaston recommends the KM-2600 for shops running complex shafts, valve bodies or housings where setup time and work-in-process, not raw cycle time, are the real cost. It's a bigger investment and a bigger learning curve than a live-tool lathe, which is why our applications engineers build your complete process plan and prove it out in the Vaughan Tech Centre before your team ever touches the machine.
2-axis CNC lathe
Kaizora KT-250
The KT-250 is Kaizora's entry-level turning centre, built for toolrooms and job shops that need reliable 2-axis turning without the cost of a live-tool platform. A 200 mm hydraulic 3-jaw chuck, 51 mm bar capacity and a 12-station bolt-on turret cover the bulk of shaft, flange and bushing work most shops see day to day. Tollaston sets this machine up as the first lathe for shops moving off manual turning equipment, or as a second machine to take routine turning off a busier mill-turn platform. The Kaizora Nexa 5T control shares its interface with our VMC and HMC lines, so an operator already trained on a Kaizora mill picks up the lathe controls quickly.
CNC turning centre with live tooling and Y-axis
Kaizora KT-400Y
The KT-400Y adds a Y-axis and 12 live-tool stations to Kaizora's turning platform, so parts that used to move to a mill for cross-holes, flats or off-center features finish complete on the lathe. A 250 mm hydraulic chuck, 65 mm bar capacity and driven tooling to 6,000 rpm cover most complex turned-part work without a second machine or a second setup. This is the turning centre Tollaston recommends most often once a shop's parts start needing more than a straight OD/ID and a chamfer — the Y-axis in particular opens up off-center milling and drilling that a standard turret geometry can't reach cleanly. It shares the Kaizora Nexa 5T control with the rest of the line, so programming carries over from a simpler lathe.