Kaizora
2019 Kaizora KV-800 Vertical Machining Centre
- Year
- 2019
- Model
- KV-800
- Location
- Vaughan, ON
- Condition
- Good
$79,500 CAD
Or call 905-555-0142
Photos
2019 Kaizora KV-800 Vertical Machining Centre — Photo Gallery
About This Listing
Equipment Details
A 2019 Kaizora KV-800 vertical machining centre, traded in against a new 5-axis cell at our Vaughan Tech Centre. This is the 40-taper, 24-station configuration most job shops run for general steel and aluminum work, and it has been housed indoors on a single site since new. Our applications team ran it through a full geometry and ballscrew check at intake and it is ready to go back to work. Because it came out of our own Tech Centre, service history and spindle hours are fully known rather than estimated. We can arrange rigging, installation and a start-up check anywhere in Ontario, and support it afterward with the same parts and service team behind our new machines.
Single-owner trade-in against a new Brenvoss 5-axis. Spindle meter reads 6,200 hours with no recorded crash history. Way covers, ballscrews and spindle bearings inspected at trade-in; full synthetic way oil and coolant changed in August 2026.
Highlights
Key Features
- 24-station arm-type automatic tool changer
- Rigid tapping and through-spindle coolant ready
- Chip auger with rear-discharge conveyor
- 4th-axis rotary table interface pre-wired
- Full enclosure with sliding front doors
- Remote jog handle and USB program transfer
Specifications
2019 Kaizora KV-800 Vertical Machining Centre Technical Specs
- Table size
- 900 x 500 mm (35.4" x 19.7")
- X / Y / Z travel
- 800 x 500 x 500 mm (31.5" x 19.7" x 19.7")
- Spindle speed
- 8,000 rpm
- Spindle taper
- BT-40
- Tool changer
- 24-station arm-type ATC
- Rapid traverse (X/Y/Z)
- 36 m/min (1,417 in/min)
- Control
- Kaizora KC-500i (Fanuc-compatible)
- Positioning accuracy
- ± 0.005 mm (0.0002")
- Recorded spindle hours
- 6,200 hrs
| Table size | 900 x 500 mm (35.4" x 19.7") |
| X / Y / Z travel | 800 x 500 x 500 mm (31.5" x 19.7" x 19.7") |
| Spindle speed | 8,000 rpm |
| Spindle taper | BT-40 |
| Tool changer | 24-station arm-type ATC |
| Rapid traverse (X/Y/Z) | 36 m/min (1,417 in/min) |
| Control | Kaizora KC-500i (Fanuc-compatible) |
| Positioning accuracy | ± 0.005 mm (0.0002") |
| Recorded spindle hours | 6,200 hrs |
What's Included
Equipment Package
Included
- Control pendant and operator manual
- Base tool holder set (BT-40, 10 pcs)
- One on-site training session
- 30-day parts warranty
Not Included
- Rigging and freight from Vaughan
- 4th-axis rotary table
- Tooling and workholding beyond the base set
- Taxes
Interested?
Ready to move forward?
Speak with our team about the 2019 Kaizora KV-800 Vertical Machining Centre. We'll provide full details, inspection history, and delivery options.
New Equipment
Also from Kaizora
Browse our current new Kaizora lineup alongside this used listing.
3-axis vertical machining centre
Kaizora KV-1100
The KV-1100 is the machine Tollaston quotes when a customer's part, or their fixture, has outgrown a standard 40-taper mill. A 1,300 x 600 mm table rated to 1,200 kg, 1,100 mm of X-travel and a 22 kW BT50 spindle turning 220 Nm of torque let it hog heavy steel and cast-iron sections that would stall a smaller machine. Despite the size, it holds the same ±0.006 mm positioning accuracy buyers expect from the KV line, and the 40-station magazine keeps complex, multi-operation parts running without a manual changeover. We install the KV-1100 most often for die/mold shops and heavy-industrial contract manufacturers who need one machine to do the roughing and the finishing.
3-axis vertical machining centre
Kaizora KV-560
The KV-560 is Kaizora's entry point into production-grade vertical machining, built for job shops and toolrooms that need to move between parts quickly without giving up rigidity. A BT40 direct-drive spindle, box-way construction on all three axes, and a 24-station arm-type changer keep cycle times tight on aluminum, steel and stainless alike. Tollaston's applications engineers set up the majority of first-time CNC buyers on this platform because the Kaizora Nexa 5 control's conversational programming shortens the learning curve without limiting what an experienced programmer can do with it later. It is the machine we recommend when the floor space and the budget are both tight but the part mix is not.
3-axis vertical machining centre
Kaizora KV-800
The KV-800 is the machine most Tollaston customers land on once they outgrow a job-shop mill and need a platform that can run unattended for a full shift. An 800 mm X-travel, a 700 kg table load rating and a 15 kW BT40 spindle (HSK-A63 optional) give it the muscle for steel and stainless production work, while a 30-station changer keeps complex parts moving without operator intervention. We run every KV-800 through a documented time study on your actual part in our Vaughan Tech Centre before it ships, so the cycle time you're quoted is the cycle time you get on your shop floor, not a catalogue number. It is our flagship recommendation for shops scaling from prototype into repeatable production.