Edgebanders
A finished edge on every panel, from job-shop batches to production shifts.
2 Models
Compact to production
25 m/min
Top feed speed
0.4 mm
Thinnest edge band handled
Not sure which edgebanders is right for you?
Our AI can help you compare machines, find parts, and explore your options.
Advantages
Why Choose Edgebanders?
Finish that matches your volume
From a compact single-phase machine to a high-speed production bander with a zero-joint option, one line covers every stage of growth.
Proven on your panels
We run your own panel stock through the machine at the Tech Centre before it ships, so edge quality is never a surprise.
Coast-to-coast service
Technicians and glue-system consumables across Canada and the US keep your bander running.
Recipe training included
Operators learn tooling changeover and recipe saving on the Sylvane Grain control before handover.
Featured
SE-45 Compact
Compact single-sided edgebander sized for job shops banding cabinet parts without a full production line.
Sylvane SE-45 Compact
Edge thickness range
0.4 - 12 mm (0.02" - 0.47")
Panel thickness
10 - 60 mm (0.4" - 2.4")
Feed speed
10 - 16 m/min (33 - 52 ft/min), variable
Min panel length
120 mm (4.7")
Our Machines
The Complete Edgebanders Lineup
Each system is engineered for specific applications. Compare specs to find the right fit.
Single-sided edgebander
SE-45 Compact
The SE-45 Compact brings edgebanding in-house for shops that have been outsourcing it or banding by hand. A pre-milling station squares the panel edge before glue is applied, so the band bonds cleanly even on panels with a slightly rough factory edge, and the EVA hot-melt glue pot is sized for a job shop's batch sizes rather than a production line's. Flush end-trimming and a standard scraper finish every panel to a paint-ready edge in one pass. It runs on a single-phase 208-240V service, so most shops can install it without an electrical upgrade. Tollaston sets up the machine on your floor, runs your own panel stock through it during commissioning, and trains your operator on glue-pot care and edge-band changeover, backed by parts and service across Canada and the US.
- Edge thickness range
- 0.4 - 12 mm (0.02" - 0.47")
- Panel thickness
- 10 - 60 mm (0.4" - 2.4")
- Feed speed
- 10 - 16 m/min (33 - 52 ft/min), variable
- Min panel length
- 120 mm (4.7")
High-speed edgebander
SE-90 Pro
The SE-90 Pro is Sylvane's production edgebander, built for cabinet shops that need every panel to come off the line looking the same, fast. A dual-motor pre-milling station and an automatic corner-rounding unit handle square and radiused panels without a tooling changeover, and the dual EVA/PUR glue pot switches between standard and moisture-resistant bonding for kitchen and bath work in the same shift. The optional zero-joint station melts the edge band's own surface instead of relying on a glue line, leaving a seam that's effectively invisible on laminate panels. A multi-wheel buffing station finishes every edge before it leaves the machine. Tollaston commissions the SE-90 Pro on your own panel stock, sets your first recipe library in the Sylvane Grain control, and trains your team on changeover between glue systems and edge profiles.
- Edge thickness range
- 0.4 - 14 mm (0.02" - 0.55")
- Panel thickness
- 8 - 60 mm (0.3" - 2.4")
- Feed speed
- 15 - 25 m/min (49 - 82 ft/min), variable
- Min panel length
- 100 mm (3.9")
See everything we carry from Sylvane.
Side by Side
Compare Systems
See how each platform stacks up across the specs that matter most.
SE-45 CompactFeatured
- Best for
- Job-shop batches, single-phase power
- Feed speed
- 10 - 16 m/min
- Edge thickness range
- 0.4 - 12 mm
- Corner rounding
- Optional add-on
- Zero-joint option
- Not available
SE-90 Pro
- Best for
- Production volume, premium finish
- Feed speed
- 15 - 25 m/min
- Edge thickness range
- 0.4 - 14 mm
- Corner rounding
- Standard automatic unit
- Zero-joint option
- Optional laser/hot-air station
| Specification | SE-45 CompactFeatured | SE-90 Pro |
|---|---|---|
| Best for | Job-shop batches, single-phase power | Production volume, premium finish |
| Feed speed | 10 - 16 m/min | 15 - 25 m/min |
| Edge thickness range | 0.4 - 12 mm | 0.4 - 14 mm |
| Corner rounding | Optional add-on | Standard automatic unit |
| Zero-joint option | Not available | Optional laser/hot-air station |
Applications
Industries We Serve
Edgebanders systems are trusted across diverse industries and production environments.
FAQ
Edgebanders Questions
Answers to common questions about our edgebanders products.
The SE-45 Compact is a single-sided machine sized for job-shop batches on single-phase power; the SE-90 Pro is a full production bander with dual-motor pre-milling, automatic corner rounding and an optional zero-joint laminate edge for high-volume shops.
It melts the edge band's own surface instead of relying on a visible glue line, leaving a seam that's effectively invisible on laminate panels — available as an option on the SE-90 Pro.
The SE-45 Compact runs on 208-240V single-phase, 30A; the SE-90 Pro needs 400V/3-phase, 45A given its dual glue system and extra stations.
Yes — on-site training covers glue-pot care, tooling and profile changeover, and day-to-day operation, plus a test run on your own panel stock.
We arrange lease and term financing through our equipment finance partners.
Guides
Maintaining your Edgebanders
Written by the people who install and service these machines.
Preventive Maintenance Schedule for CNC Routers and Edgebanders
The machines that last longest aren't the ones that never break down — they're the ones on a disciplined maintenance schedule. Here's a daily-to-annual plan for both machines.
Luc BergeronNested-Based CNC Routers: What Cabinet Shops Should Check Before Buying
Table size and spindle horsepower are the easy numbers to compare. Vacuum zones, tool changer capacity and dust collection sizing are what actually decide whether a router keeps up with your shop.
Dev Malhotra
Ready to Discuss Your Edgebanders Solution?
Our team has 32+ years of experience helping Canadian manufacturers find the right cutting and processing equipment.
32
Years in Business
4,800+
Machines Installed
46
Factory-Trained Technicians
Request a Quote
Tell us about your application and we'll recommend the right machine for your operation.
Financing Available
Flexible payment options on qualifying equipment.
Or email us at [email protected]