320 tons
Largest single-unit tonnage
40'
Longest tandem bending length
200
Stored bend programs on the panel folder
Not sure which press brakes & panel folders is right for you?
Our AI can help you compare machines, find parts, and explore your options.
Advantages
Why Choose Press Brakes & Panel Folders?
Consistent bend angles
CNC back gauges and automatic crowning hold the same angle end to end, bend after bend.
One control across the line
The Ferroniq Arc 19 touchscreen runs every model, so operators move between brakes without retraining.
Tech Centre test bends
We prove tooling and bend sequences on your own material before the brake ships.
Coast-to-coast service
Technicians and tooling stock across Canada and the US keep bending, not waiting.
Featured
FH-320 Tandem
320-ton hydraulic press brake built for tandem operation on long panels and heavy plate.
Ferroniq FH-320 Tandem
Tonnage
320 US tons (2,850 kN)
Bending length
6000 mm (20')
Tandem bending length
Up to 12,000 mm (40') with a second FH-320
Stroke
400 mm (15.7")
Our Machines
The Complete Press Brakes & Panel Folders Lineup
Each system is engineered for specific applications. Compare specs to find the right fit.
Servo-electric press brake
FE-135 Servo
The FE-135 Servo replaces a hydraulic power pack with a servo-electric drive, so it draws power only during the bend itself, runs noticeably quieter, and needs no hydraulic oil to maintain. Rated at 135 US tons over a 3000 mm (10') bending length, it holds bend-to-bend repeatability tighter than a comparable hydraulic brake and starts up ready to bend with no oil warm-up cycle. A 4-axis CNC back gauge and the Ferroniq Arc 19 touchscreen control handle multi-bend part programs from a graphical sequence editor. Tollaston sets up and levels the brake, programs your first parts, and trains your operators on tooling and bend-sequence setup.
- Tonnage
- 135 US tons (1,200 kN)
- Bending length
- 3000 mm (10')
- Stroke
- 250 mm (9.8")
- Daylight (open height)
- 420 mm (16.5")
CNC panel folder
FP-2500 Panel
The FP-2500 Panel automates the up-and-down bending that would otherwise take a press brake and a second set of hands. A blade-and-beam bending head folds sheet up to 2500 x 1250 mm (98" x 49") and 3 mm (0.12") mild steel — 2.5 mm (0.1") stainless — while the sheet stays flat on the table, so one operator loads and programs box, tray and enclosure parts with every bend angle and sequence stored as a part program. The Ferroniq Arc 19 touchscreen control calls up to 200 stored programs and drives the motorized back gauge and blade positioning automatically between bends. Tollaston installs, programs your first parts library, and trains your team on the workflow.
- Max sheet size
- 2500 x 1250 mm (98" x 49")
- Max thickness, mild steel
- 3 mm (0.12")
- Max thickness, stainless steel
- 2.5 mm (0.1")
- Max thickness, aluminum
- 4 mm (0.16")
See everything we carry from Ferroniq.
Side by Side
Compare Systems
See how each platform stacks up across the specs that matter most.
FH-320 TandemFeatured
- Best for
- Heavy plate and long panels
- Tonnage
- 320 tons
- Bending length
- 20' (40' tandem)
- Drive type
- Hydraulic, synchronized dual-cylinder
- Operator load
- One per unit, coordinated for tandem
FE-135 Servo
- Best for
- Job-shop precision bending
- Tonnage
- 135 tons
- Bending length
- 10'
- Drive type
- Servo-electric
- Operator load
- One
FP-2500 Panel
- Best for
- High-volume box and tray forming
- Tonnage
- N/A (blade-and-beam)
- Bending length
- 98" sheet width
- Drive type
- Servo-electric blade-and-beam
- Operator load
- One
| Specification | FH-320 TandemFeatured | FE-135 Servo | FP-2500 Panel |
|---|---|---|---|
| Best for | Heavy plate and long panels | Job-shop precision bending | High-volume box and tray forming |
| Tonnage | 320 tons | 135 tons | N/A (blade-and-beam) |
| Bending length | 20' (40' tandem) | 10' | 98" sheet width |
| Drive type | Hydraulic, synchronized dual-cylinder | Servo-electric | Servo-electric blade-and-beam |
| Operator load | One per unit, coordinated for tandem | One | One |
Applications
Industries We Serve
Press Brakes & Panel Folders systems are trusted across diverse industries and production environments.
FAQ
Press Brakes & Panel Folders Questions
Answers to common questions about our press brakes & panel folders products.
A press brake clamps the sheet and moves a punch through a die to form the bend — flexible for any shape but slower per part. A panel folder folds the sheet with a blade-and-beam head while the sheet stays flat, which is faster and more consistent for repeat box and tray parts.
All three Ferroniq models run on 600V/3-phase service; amperage scales with tonnage, from 40A on the panel folder to 100A per unit on the FH-320 Tandem.
Yes — every install includes a standard tooling package sized to your parts, on-site operator training, and a test bend on your own material at the Tech Centre.
We arrange lease and term financing through our equipment finance partners, including trade-in of an existing brake.
The brake, standard tooling, Ferroniq Arc 19 control, rigging and installation, commissioning, and operator training.
Guides
Maintaining your Press Brakes & Panel Folders
Written by the people who install and service these machines.
Ready to Discuss Your Press Brakes & Panel Folders Solution?
Our team has 32+ years of experience helping Canadian manufacturers find the right cutting and processing equipment.
32
Years in Business
4,800+
Machines Installed
46
Factory-Trained Technicians
Request a Quote
Tell us about your application and we'll recommend the right machine for your operation.
Financing Available
Flexible payment options on qualifying equipment.
Or email us at [email protected]